Saturday, June 27, 2020

Hardware side issue for windows slow performance

Hardware side issue for windows slow performance


Sometimes the performance of the system is affected by the malfunction of the system hardware.

The list of the hardware malfunction are the following below:


1. No power:


    • It means the following hardware is not working properly. 

1. Power cord


2. Switch Mode Power Supply


3. RAM


4. Processor



2. When electricity flows into your PC panel:


They are the reason for electricity flows into your PC panel:


1. If electricity flows into your PC cabinet. 

  • The voltage difference between the home and the workplace.
  • You must check your power cable this depend your building voltage fluctuation and if you are facing the same problem again contact your system admin or other service support experts.
  • Give your PC a proper quality equipment with your system administrator suggestion.

2. If you have laptop please contact your system administrator. 

 

3. Disk Boot Failure:


If you get disk boot failure issue then you must check the following conditions:

  • Check your system connection.
  • This should be your Hard disk problem like damage or other problem.
  • It should be your BIOS issue contact your system admin or other service support experts. 


4.Invalid system disk:

 
Invalid system Disk Error reasons are the following below:

  • Your system show the invalid system disk error that indicate your Hard disk damage or problem.
  • You can rectify your hard disk with the help of other third party software.
  • Rectify your hard disk or replace it.


5. One long beep and multiple short beep:

 
A long beep and several short beeps reasons are given below:

  • If you have Laptop contact your system admin or other service support experts.
  • Contact your system admin or other service support experts if the PC is dusty.
  • Your RAM was not working or it working like damaged item.


6. One short beep and Multiple long beep:


A short beep and several long beeps reasons are given below:

  • Your system connectors are damaged.
  • Otherwise check they are connect properly.
  • Contact your system admin or other service support experts if this problem persists after.


7. CMOS Checksum error:


If you got CMOS checksum error it depend to the following reason:

  • This is the indication of the CMOS battery problems.
  • If the problem persists after replacing the CMOS battery, it indicate that the RTC Crystal IC is not working.
  • This time you must contact your system admin or other service support experts.


8. Auto restart:


If your system get restart automatically error it depends to the following reason:

  • If SMPS not working properly then your system restart automatically.
  • If your Operating System was corrupted then your system restart automatically.
  • If your computer is infected with malware, your computer will restart automatically.
  • your system have more dust it will make your system automatic restart because computer cooling system easily affected by dust.


9. Fatal error:


If you got Fatal Error it depends to the following reason:

  • Your connectors should be damage or problem.
  • It can be the confirmation for your Hard disk damage or problem.
  • Your RAM was not working or it working like damaged item.

10. Blue Screen of Death:

If your computer shows the blue screen of death error it depends to the following reason:
  • Take a look at a dump file to figure out exactly what cause of the error is.
  • If you got Visual Basic software you can open the dump file.
  • If you don't have any idea about dump files press the link below I put the details about dump files (Junk files) on link. https://rb.gy/r1fn3a
  • Alternatively ,updated hardware driver or consider the situation in which Blue Screen Of Death happened (for example, you have installed new hardware/software).
  • And also might to run hardware diagnostics.

11. DLL file missing:

If your computer got DLL file missing error that also depends to the following reason:
  • Reinstall the Software you get DLL file missing error.
  • Otherwise Find the missing DLL file and copy it to DLL registration filders folder.
  • Register DLL if needed through CMD.

If you want any Service support for Computer and Laptop you can contact RPTMS at any time.
And also we have Annual Maintenance Contract if you needed.


1 comment:

  1. QuickBooks was developed to make accounting life easy and to make it more smoother and easy the company provides users with the best team of QuickBooks customer service. You can call QuickBooks customer service team at any time and we will be there to help you with any issue that you might have.

    ReplyDelete